엔비디아 RTX 5080, 새로운 DirectX 레이트레이싱 기술로 220배 이상 FPS 향상, RX 9070 XT보다 3.4배 빠른 성능
🇰🇷 한글 번역
마이크로소프트의 최신 DirectX Raytracing(DXR) 기술은 독립적인 테스트에서 여전히 놀라운 결과를 내고 있으며, 특히 부하가 큰 합성 시뮬레이션에서 NVIDIA의 GeForce RTX 5080이 프레임 레이트를 220배 이상 향상시키고 가속 구조 메모리 소비량을 94% 줄이는 성과를 거두었다.
우리가 최근 AMD의 Radeon RX 9070 XT에 대한 보도를 다룬 후, 그래픽 애호가인 Osvaldo Pinali Doederlein은 이제 NVIDIA GeForce RTX 5080에서 마이크로소프트의 클러스터드 지오메트리(Clustered Geometry) 구현을 테스트하여 더욱 인상적인 결과를 내놓았다.
클러스터드 지오메트리 활성화 시 RTX 5080, 1.4 FPS에서 310 FPS로 상승
Osvaldo는 이전 AMD 테스트에서 사용했던 동일한 D3D12RaytracingClusteredGeometry 샘플을 사용하여 새로운 클러스터드 지오메트리 구현과 기존 Bottom-Level Acceleration Structure(BLAS) 재구성을 비교했다.
그는 일관된 비교를 위해 애니메이션이 정확히 동일한 프레임에서 일시 정지되도록 했다.
RTX 5080은 다음과 같은 결과를 보였다.
이는 약 221배 더 높은 프레임 레이트, 720배 빠른 가속 구조 재구성, 그리고 94.3% 낮은 메모리 소비량을 의미한다.
흥미롭게도 실제 레이 디스패치 시간은 1.8ms에서 2.0ms로 약간 증가했으며, 이는 이러한 엄청난 성능 향상이 주로 레이 탐색 자체를 가속화하는 것이 아니라 가속 구조 구축 오버헤드를 줄임에서 비롯된다는 이전의 관찰을 뒷받침한다.
클러스터드 지오메트리를 활성화했을 때 91 FPS를 기록한 Radeon RX 9070 XT와 비교하면, NVIDIA의 RTX 5080은 이 특정 테스트에서 약 3.4배 더 빠랐다.
NVIDIA GPU는 클러스터드 지오메트리를 활성화했을 때와 비활성화했을 때 모두 가속 구조 메모리를 훨씬 적게 소비했다. Osvaldo는 이 장점이 Turing 아키텍처로 거슬러 올라가는 NVIDIA의 더 성숙한 Bounding Volume Hierarchy(BVH) 압축 기술에 부분적으로 기인한다고 설명한다.
이상하게도, 클러스터드 지오메트리를 비활성화했을 때 RX 9070 XT는 RTX 5080보다 실제로 더 나은 성능을 보였으며, 1.7 FPS 대 1.4 FPS를 기록했다. 이는 가속 구조 재구성에 드는 비용이 GPU의 실제 레이 트레이싱 처리량과 무관하게 성능에 얼마나 극적으로 영향을 미칠 수 있는지를 강조한다.
Osvaldo는 이러한 수치를 실제 게임에 그대로 적용하는 것을 경고했다. 이 샘플에는 디테일 레벨(LOD) 시스템이 빠져 있어 먼 거리에서도 불필요하게 복잡한 지오메트리가 표시된다. 실제 경로 추적 게임은 훨씬 더 정교한 최적화를 사용하므로, 이러한 극단적인 성능 향상이 현실에서 발생하기는 매우 어렵다.
NVIDIA, RTX 메가 지오메트리가 6,000만 개의 애니메이션 식물 경로 추적을 가능하게 하는 방식 상세 설명
한편, NVIDIA는 마이크로소프트의 새로운 클러스터드 지오메트리와 파티션드 톱레벨 가속 구조(PTLAS)가 기존 RTX 메가 지오메트리 기술의 핵심 기능을 사실상 표준화하는 방법을 설명하는 상세한 기술 백서를 발표했다.
클러스터드 지오메트리는 삼각형을 재사용 가능한 가속 구조로 조직화하여, 상세한 메시가 애니메이션되거나 수정될 때마다 비싼 재구성이 작업을 피한다.
PTLAS는 장면 수준에서 관련 문제를 해결하여, 개발자가 큰 환경의 전체 톱레벨 가속 구조를 반복적으로 재구성하는 대신 개별 섹션을 업데이트할 수 있게 한다.
NVIDIA는 25km² 크기의 숲에 6,000만 개의 개별 애니메이션이 가능한 식물이 포함된 다가오는 DirectX 12 샘플을 통해 이러한 가능성을 시연한다. 이 샘플에는 실시간 경로 추적과 동적 식생이 포함되어 있다.
이 데모는 지형 기하학을 효율적으로 관리하기 위해 636개의 재사용 가능한 타일링 패턴을 사용하며, 파티션은 카메라 위치와 바람과 같은 환경 조건에 따라 동적으로 조정됩니다.
이러한 발전은 이미 NVIDIA가 RTX 메가 지오메트리 식생 기술을 시연한 《더 위처 4》를 포함한 미래의 오픈월드 게임에 특히 유용할 수 있습니다.
중요하게도, NVIDIA 게임 준비 드라이버 621.01은 전용 미리보기 드라이버를 요구하지 않고 모든 GeForce RTX 세대에 걸쳐 클러스터드 지오메트리와 PTLAS를 이미 지원합니다. 그러나 DirectX 12 기능 자체는 여전히 Agility SDK 1.722 미리보기의 일부입니다. 한편 AMD는 현재 호환되는 Radeon GPU를 위한 별도의 개발자 미리보기 드라이버를 제공하고 있습니다.
우리가 이전에 보고한 바와 같이, 이러한 기술에 대한 마이크로소프트의 표준화는 지원되는 NVIDIA, AMD 및 인텔 하드웨어 전반에 고급 기하학 관리를 가능하게 할 것입니다.
이러한 합성 결과는 실제 게임 성능과 혼동되어서는 안 되지만, 더 효율적인 가속 구조 관리를 통해 제거될 수 있는 계산 오버헤드가 얼마나 되는지를 보여줍니다. 이는 향후 게임이 비례하는 성능 저하 없이 훨씬 더 디테일한 레이 트레이싱 환경을 제공할 수 있음을 잠재적으로 의미합니다.
뉴스 출처: Osvaldo Pinali Doederlein의 X 스레드
Wccftech의 뉴스 커버리지를 피드에서 더 많이 받으려면 Google에서 Wccftech를 팔로우하세요.
📄 원문 (English)
Microsoft's latest DirectX Raytracing (DXR) technology continues to deliver remarkable results in independent testing, with NVIDIA's GeForce RTX 5080 achieving a more than 220-fold frame-rate improvement and a 94% reduction in acceleration structure memory consumption in a particularly demanding synthetic demonstration.
Following our recent coverage of AMD's Radeon RX 9070 XT, graphics enthusiast Osvaldo Pinali Doederlein has now also tested Microsoft's Clustered Geometry implementation on an NVIDIA GeForce RTX 5080, producing even more impressive results.
RTX 5080 Goes From 1.4 FPS To 310 FPS With Clustered Geometry Enabled
Using the same D3D12RaytracingClusteredGeometry sample employed in his previous AMD testing, Osvaldo compared conventional Bottom-Level Acceleration Structure (BLAS) rebuilding against Microsoft's new Clustered Geometry implementation.
He also ensured that the animation was paused at the exact same frame for a consistent comparison.
The RTX 5080 delivered the following results:
That's approximately 221× higher frame rates, 720× faster acceleration structure rebuilding, and 94.3% lower memory consumption.
Interestingly, the actual ray dispatch time increased slightly from 1.8 ms to 2.0 ms, reinforcing our previous observation that these enormous performance improvements primarily stem from reducing acceleration structure construction overhead rather than accelerating ray traversal itself.
Compared with the Radeon RX 9070 XT, which achieved 91 FPS with Clustered Geometry enabled, NVIDIA's RTX 5080 was approximately 3.4 times faster in this particular test.
The NVIDIA GPU also consumed substantially less acceleration structure memory, both with Clustered Geometry enabled and disabled. Osvaldo attributes this advantage partly to NVIDIA's more mature Bounding Volume Hierarchy (BVH) compression technology, which dates back to its Turing architecture.
Curiously, the RX 9070 XT actually outperformed the RTX 5080 with Clustered Geometry disabled, achieving 1.7 FPS versus 1.4 FPS. This highlights how drastically acceleration structure rebuilding costs can affect performance, independently of a GPU's actual ray tracing throughput.
Osvaldo also cautioned against extrapolating these numbers to actual games. The sample lacks a Level of Detail (LOD) system, leaving unnecessarily complex geometry visible even in distant areas. Real-world path-traced games employ considerably more sophisticated optimizations, making such extreme performance improvements highly unlikely.
NVIDIA Details How RTX Mega Geometry Enables Path Tracing Of 60 Million Animated Plants
Meanwhile, NVIDIA has published a detailed technical whitepaper explaining how Microsoft's new Clustered Geometry and Partitioned Top-Level Acceleration Structures (PTLAS) essentially standardize key capabilities of its existing RTX Mega Geometry technology.
Clustered Geometry organizes triangles into reusable acceleration structures, avoiding expensive rebuilding operations whenever detailed meshes are animated or modified.
PTLAS tackles a related problem at the scene level, allowing developers to update individual sections of a large environment instead of repeatedly reconstructing its entire top-level acceleration structure.
NVIDIA demonstrates the possibilities through an upcoming DirectX 12 sample featuring a 25 km² forest containing 60 million individually animatable plants, with real-time path tracing and dynamic vegetation.
The demonstration uses 636 reusable tessellation patterns to efficiently manage terrain geometry, while partitions dynamically adjust according to camera position and environmental conditions such as wind.
These developments could prove particularly valuable for future open-world games, including The Witcher 4, for which NVIDIA has already demonstrated its RTX Mega Geometry foliage technology.
Crucially, NVIDIA Game Ready Driver 621.01 already supports Clustered Geometry and PTLAS across every GeForce RTX generation, without requiring a dedicated preview driver. However, the DirectX 12 features themselves remain part of the Agility SDK 1.722 Preview. AMD, meanwhile, currently provides a separate developer preview driver for compatible Radeon GPUs.
As we previously reported, Microsoft's standardization of these technologies should make advanced geometry management accessible across supported NVIDIA, AMD, and Intel hardware.
Although these synthetic results should not be confused with real-world gaming performance, they demonstrate just how much computational overhead can be eliminated through more efficient acceleration structure management, potentially allowing future games to feature substantially more detailed ray-traced environments without proportional performance penalties.
News Source: Osvaldo Pinali Doederlein's X thread
Follow Wccftech on Google to get more of our news coverage in your feeds.
▶ 칩 라이브 24 홈으로 — chiplive24.com