AMD, 차세대 HBM 베이스 다이 공급 위해 삼성 파운드리 '테일러2' 시설 활용 확정…삼성 파운드리 큰 수혜 예상
🇰🇷 한글 번역
- 0-20%: 불가능 - 신뢰할 수 있는 출처가 부족함
- 21-40%: 의문스러움 - 여전히 우려 사항 존재
- 41-60%: 타당함 - 합리적인 증거 있음
- 61-80%: 확률 높음 - 강력한 증거 있음
- 81-100%: 매우 높음 - 여러 신뢰할 수 있는 출처 있음
50%
타당함
새로운 보고서에 따르면 삼성의 계약 제조 부문이 마침내 호재를 얻고 있을 수 있다고 한다. 한국 거대 기업의 파운드리 부문이 프로세서 제조업체를 위해 고급 고대역폭 메모리(HBM) 베이스 다이의 대량 생산을 위해 AMD와 손을 잡았기 때문이다. 비록 엔비디아와의 파트너십 체결만큼 수익성이 높지는 않지만, 삼성은 고급 공정 노드의 속도를 높이기 위해 작은 단계들을 밟고 있다.
AMD의 참여로 두 번째 테일러 공장 기공, 엔비디아는 여전히 미미한 존재
사정에 정통한 소식통들은 매일경제신문에 AMD가 할당된 테일러 파브 2의 생산 용량 전부를 사실상 차지하고 있어, 곧 완공될 시설이 초기 요구 사항을 충족하기에 거의 여지가 없다고 전했다. 이처럼 광범위한 약속을 확보한 것은 삼성에게 부인할 수 없는 승리로, 이는 초기 테일러 사이트에서 테슬라와 자동차 물량을 확보했던 이전 사례를 넘어선 것이다.
이렇게 새로 형성된 파트너십에 따라 삼성은 텍사스에서 기본 논리 베이스 다이의 제조를 담당하고, 이를 한국 내 메모리 파운드리에서 생산된 DRAM과 결합하여 완성된 턴키식 HBM 어셈블리를 공급할 계획이다. 수요 측면에서 이는 보고된 바에 따르면 270만 평방피트 규모인 테일러 파브 2의 크기를 반영한다.
파브 2는 첫 번째 테일러 시설보다 약 1.5배 더 크다. 보고서에 따르면 토지 준비는 이미 완료되었으며 핵심 구조 공사가 즉시 시작되었다. 삼성은 2029년 2월까지 장비 이전을 목표로 하고 있으며, 이는 2030년 플래그십 2nm 공정 상용 대량 생산으로 이어질 전망이다. AMD가 삼성과 손을 잡은 점을 고려할 때, 엔비디아도 목록에 오를 것은 시간문제일까?
그렇지는 않다. 엔비디아는 다른 목표를 가지고 있는 것으로 보인다. 이전 보고서에 따르면 AI GPU 제조업체는 삼성, SK하이닉스, 마이크론을 포함한 메모리 파트너들에게 TSMC를 통해 모든 맞춤형 NVHBM 베이스 다이 제조를 표준화할 것을 강력히 촉구했다. 이러한 집단적 연합을 형성함으로써 엔비디아는 단일 통합 메모리 컨트롤러 아키텍처를 배포할 수 있으며, 이는 여러 반도체 파운드리 사용 시 필연적으로 발생하는 지연 시간 차이, 열적 불일치 및 성능 격차를 제거한다.
엔비디아는 서로 다른 DRAM 제조업체로부터 샘플을 획득함으로써 발생하는 불필요한 검증 단계를 겪을 필요가 없게 되어 NVHBM 기술을 성공적으로 배포하는 데 있어 덜 골치 아픈 상황이 된다. 그럼에도 불구하고 이러한 setbacks(좌절)은 삼성이 자체 목표를 추구하는 것을 막지 못했다. 현재 삼성은 자체 독점 파운드리 프로세스를 테스트하고 검증하여 NVHBM 베이스 다이 처리 능력을 입증하고 있다.
다행히도 HBM 베이스 다이 개발로 전환함으로써 삼성은 2nm 자원을 확보했으며, 이는 차세대 엑시노스 5G 모뎀 및 AMD와의 미래 협력 방안 등 다른 기술에 집중할 수 있게 해줄 것으로 보고된다. 우리는 삼성의 논평을 요청했지만, 최신 태그팀 루머가 사실이라면 파운드리 거대 기업은 마침내 안도의 한숨을 내쉴 수 있게 될 것이다.
뉴스 출처: 매일경제신문
구글에서 Wccftech를 팔로우하여 피드에서 더 많은 뉴스 커버리지를 받아보십시오.
📄 원문 (English)
- 0-20%: Unlikely - Lacks credible sources
- 21-40%: Questionable - Some concerns remain
- 41-60%: Plausible - Reasonable evidence
- 61-80%: Probable - Strong evidence
- 81-100%: Highly Likely - Multiple reliable sources
50%
Plausible
A new report states that Samsung’s contract manufacturing division could finally be catching a break as the Korean giant’s foundry sector has tied up with AMD in mass producing advanced High-Bandwidth Memory base dies for the processor manufacturer. While it’s still not as lucrative as inking a partnership with NVIDIA, Samsung is taking small steps to ensure that its advanced nodes pick up the pace.
Samsung foundry breaks ground on second Taylor plant as AMD steps in while NVIDIA remains elusive
Sources familiar with the matter informed Maeil Business Newspaper that AMD accounts for virtually the entire allocated production capacity of Taylor Fab 2, leaving the upcoming facility with barely enough headroom to meet initial requirements. Securing such an expansive commitment marks an undeniable victory for Samsung, which previously secured automotive volume with Tesla for its initial Taylor site
Under this newly forged partnership, Samsung plans to fabricate the underlying logic base dies in Texas before bonding them with DRAM produced at its domestic memory fabs in South Korea to deliver complete, turnkey HBM assemblies. As for the demand, that’s representative of Taylor Fab 2’s size, which reportedly measures 2.7 million square feet.
Fab 2 is also about 1.5 times larger than the first Taylor facility. The report also mentions that ground preparation is already finished, with core structural construction commencing immediately. Samsung is targeting equipment move in by February 2029, paving the way for commercial mass production by 2030 on its flagship 2nm process. Looking at how AMD has joined forces with Samsung, it’s only a matter of time before NVIDIA is on the list, right?
Not quite, as NVIDIA appears to have different goals. According to a previous report, the AI GPU manufacturer strongly urged its memory partners, including Samsung, SK hynix, and Micron, to standardize all custom NVHBM base die manufacturing through TSMC. By forming this collective union, NVIDIA can deploy a single unified memory controller architecture, eliminating latency discrepancies, thermal disparity, and performance gaps that inevitably emerge when using multiple semiconductor foundries.
NVIDIA won’t have to endure unnecessary validation steps that materialize from acquiring samples from different DRAM manufacturers, making it less of a headache to successfully deploy its NVHBM technology. Still, this setback hasn’t stopped Samsung from pursuing its own goals, as the company is currently testing and validating its own proprietary foundry processes to demonstrate that it can handle NVHBM base dies.
Fortunately, by moving to HBM base die development, Samsung has reportedly freed up 2nm resources that’ll enable it to focus on different technologies like its next-generation Exynos 5G modem and future resolutions with AMD. We’ve reached out to Samsung for a comment, but assuming that the latest tag-team rumors are true, the foundry giant can finally breathe a sigh of relief.
News Source: Maeil Business Newspaper
Follow Wccftech on Google to get more of our news coverage in your feeds.
▶ 칩 라이브 24 홈으로 — chiplive24.com