TESLA LIVE 24.com · 24시간 반도체·SOXL 시세·속보 한국어 실시간

마이크론, ambitious DRAM·NAND 로드맵 공개…3D NAND, High-NA EUV, 신소재, 커스텀 실리콘 부활

Tom's Hardware · 2026.11.04 23:00 · 원문 사이트
🇰🇷 한글 번역
마이크론, 야심 찬 DRAM 및 NAND 로드맵 공개 — 3D NAND, 하이-NA EUV, 신소재, 맞춤형 실리콘의 부활 맞춤형 메모리가 곧 주류가 될 전망이다. 지난달 마이크론은 향후 수년간의 DRAM 및 NAND 메모리 로드맵을 공개하며 웨이퍼 본딩, NAND 셀을 더 작게 만드는 데 도움이 되는 신소재, 하이-NA(EUV) 리소그래피의 사용 계획, 그리고 3D DRAM으로 나아가는 움직임을 상세히 밝혔다. 마이크론의 이야기 중 가장 의미 있는 부분은 AI 개발자들이 고유한 프로세서 아키텍처와 특정 워크로드에 최적화된 메모리 및 스토리지 솔루션을 점점 더 요구함에 따라, 맞춤형 DRAM 및 NAND 제품 포트폴리오를 확대할 계획이라는 점이다. "DRAM은 현재 원자 수준의 한계에 근접해 있습니다. 비록 몇몇 평면 노드에 대해 확신을 가지고 있지만, 비용과 성능 관점에서 최적의 시기에 3D DRAM을 도입하는 데 매우 집중하고 있습니다."라고 마이크론의 회장 겸 최고기술책임자(CTO)이자 제품 책임자인 스콧 디보어는 이달 초 열린 회사의 행사에서 말했다. "[3D NAND와 관련하여 우리는] 셀 아키텍처의 집적도를 높이는 신소재에 정말 집중하고 있으며, 앞으로 XYZ 스케일링에 계속 집중할 것입니다." DRAM: 4F2 셀 폐기, 하이-NA EUV 리소그래피, 신소재 및 3D DRAM이 미래 스케일링을 가능하게 하다 예상치 못한 움직임으로, 마이크론은 경쟁사인 CXMT, 삼성, SK하이닉스와 달리 4F2 메모리 셀로 DRAM을 생산할 계획을 포기했다. 마이크론은 현재 수준을 넘어선 실행 가능한 스케일링 경로가 부족하다는 점을 그 이유로 들었다. 대신 마이크론의 향후 로드맵에는 웨이퍼 본딩, 하이-NA EUV 리소그래피, 신소재, 그리고 결국 3D DRAM이 포함된다. 회사는 2027년 하반기에 차세대 1δ(1-델타) 메모리의 양산에 착수할 계획이며, 이후 1ε(1-엡실론), 제타(ζ), 에타(η) 기술은 다양한 개발 단계에 있다. 병행하여 마이크론은 기존 평면 메모리를 궁극적으로 대체할 수 있는 두 세대 이상의 3D DRAM을 개발 중이다. 현재 대량 생산(HVM) 단계에 있는 마이크론의 1γ(1-감마) DRAM 공정 기술은 EUV 리소그래피를 사용하는 회사의 첫 번째 DRAM 노드다. 이전에 마이크론은 DUV 리소그래피를 통한 멀티패터닝을 사용했으며, EUV를 임계 레이어에 의존한 삼성과 SK하이닉스와 경쟁력을 유지해 왔다. 마이크론의 차세대 1δ(1-델타) 제조 공정은 현재 수율 증대 단계에 있으며, 2027년 하반기에 양산에 진입할 예정이다. 회사는 이 기술이 1γ 대비 비트 밀도를 중반부(약 20% 이상) 증가시킬 것으로 예상한다. 또한 고급 고-k 금속 게이트(HKMG) CMOS, 신소재, 앵스트롬 수준의 공정 제어 및 장비 지능은 성능, 전력 효율성, 그리고 궁극적으로 수율과 비용 개선에도 기여할 것이다. 마이크론은 1δ DRAM을 미국에서 제조할 계획이며, 이 기술을 차세대 DDR, LPDDR, 그래픽 메모리, HBM5, 수직 HBM(vHBM), 그리고 수직 에지 추론 메모리(vEIM) 제품에 사용할 예정이다. 한편, HBM5, vHBM5 및 vEIM 제품을 제조하기 위해 해당 노드는 열 성능을 향상시키기 위한 실리콘 관통 비아(TSV) 및 기타 요소를 지원하는 추가 기능도 제공할 것이다. 이후 1ε(1-엡실론) 공정은 웨이퍼 본딩에 의존할 예정이며, 이를 통해 마이크론은 별도의 웨이퍼에서 서로 다른 구조를 제작한 후 이를 결합할 수 있게 된다. 이러한 접근 방식은 메모리 설계 및 제조의 유연성을 높일 수 있지만, 마이크론은 웨이퍼 본딩을 구현할 계획, 결합할 구조, 그리고 해당 기술이 밀도, 성능 및 전력 소비에 가져올 개선 사항에 대해 아직 공개하지 않았다. 해당 공정은 현재 개발 중이며, 양산 일정에 대한 발표는 없다. 마이크론의 ζÅ(제타-앙스트롬) 생산 노드는 현재 초기 개발 단계에 있으며, 메모리 제조에 하이-NA EUV 리소그래피를 도입해 임계 치수를 더욱 축소할 수 있게 될 것이다. 회사는 하이-NA 리소그래피가 필요한 레이어 수, 예상되는 밀도 개선 효과, 그리고 기술의 양산 시기에 대해 밝히지 않았다. 그러나 이 노드가 도입되기까지는 최소한 2030년까지 기다려야 할 것이며, 이는 삼성과 SK하이닉스가 DRAM 파운드리에서 하이-NA EUV를 채택할 예정인 2028년 이후의 일이다. ηÅ(에타-앙스트롬) 공정은 마이크론이 공개한 평면 DRAM 로드맵에서 가장 먼 세대를 나타내며, 현재 경로 탐색(pathfinding) 단계에 있다. 마이크론은 DRAM 생산 공정에 하이-NA EUV 리소그래피를 도입한 후, 다른 스케일링 방법을 채택할 계획이다. 마이크론은 새로운 소재를 언급하고 있지만, 구체적인 소재를 특정하거나 이들이 소자 구조에 어떤 영향을 미칠지 설명하지는 않았다. 여기에는 더 작은 트랜지스터와 커패시터를 제조하고 궁극적으로 DRAM 셀 밀도를 높일 수 있는 새로운 포토레지스트, 증착 전구체, 유전체 소재, 또는 전도성 소재 등이 포함될 수 있다. 어쨌든 마이크론의 로드맵은 6F² 셀 기반 DRAM의 개발을 계속하는 데 초점을 맞추고 있으며, 이는 CXMT, 삼성, SK하이닉스의 계획과 다르다. 3D1 및 3D2: 3D DRAM으로의 전환 임박 기존 DRAM 개발과 병행하여 마이크론은 현재 3D1 및 3D2로 명명된 두 세대의 3D DRAM을 개발 중이다. 평면 DRAM이 비트 밀도를 높이기 위해 주로 더 작은 메모리 셀에 의존하는 것과 달리, 3D DRAM은 수직 차원을 활용하여 주어진 면적 내에 더 많은 메모리 셀을 수용할 것이다. 마이크론은 해당 기술이 제조 비용과 성능 측면에서 기존 DRAM과 경쟁력이 생길 때 도입할 계획이다. 회사는 아키텍처, 레이어 수, 밀도 목표치에 대해 공개하지 않았다. 사실 마이크론은 2030년까지의 미래 메모리 아키텍처를 제시했지만, DRAM 제조 로드맵에서는 1δ 공정에 대해서만 명확한 생산 기간을 제공하고 있으며, 이 공정은 2027년 하반기에 대량 생산에 진입할 예정이다. 회사는 이후 평면 DRAM 노드 또는 두 세대의 3D DRAM에 대한 생산 일정을 공개하지 않았다. 맞춤형 HBM 및 수직 메모리 아키텍처 기존 DRAM 외에도 마이크론은 향후 제조 기술을 HBM4E, HBM5, HBM5E 및 새로운 수직 통합 메모리 아키텍처에 사용할 계획이다. HBM4E부터 시작해 회사는 표준 및 맞춤형 HBM 제품을 제공할 예정이며, 이어 맞춤형 HBM5E, vHBM, vEIM(수직 엣지 추론 메모리)이 뒤따를 것이다. 이 모든 것은 대량 생산 제품에서 맞춤형 메모리의 재등장을 의미한다. 맞춤형 HBM4E(cHBM4E)는 마이크론의 고객들이 메모리 I/O 폭을 축소하고/또는 메모리 베이스 다이(logic)에 추가 로직을 통합하여 계산용宝贵的 다이 공간을 확보하고, 특정 AI 가속기를 위해 성능과 전력 소비를 최적화할 수 있도록 한다. 마이크론의 사장 겸 최고기술책임자(CTO) 및 제품 책임자인 스콧 디보어(Scott DeBoer)에 따르면, 이러한 기능 중 일부는 원래 ASIC 자체에 존재했을 것이므로, 이를 메모리 근처로 이동시키면 전체 시스템 효율성이 향상될 것이다. 디보어는 “우리가 베이스 다이와 공동 설계할 때, 베이스 다이에 탑재하고자 하는 특정 로직 요소들은 일반적으로 GPU 회로로부터 베이스 다이로 오프로딩되는 것이며, 이는 메모리 근처에 배치하기 위한 것이다”라고 말했다. 그는 “베이스 다이로 이동하는 것이 더 타당한 요소들은 [수직 HBM] 시간대 안에서도 현실이 될 것”이라고 덧붙였다. 이러한 기능을 지원하기 위해 마이크론은 표준 및 맞춤형 HBM 제품 모두의 베이스 다이에 첨단 파운드리 공정 기술을 사용할 계획이지만, 구체적인 노드는 공개하지 않았다. 맞춤형 설계의 경우, 회사는 고객 요구사항을 충족하는 가장 비용 효율적인 공정을 선택할 것이다. 예를 들어, 마이크론은 HBM4E가 성능 및 전력 목표치를 달성하기 위해 더 첨단화된 CMOS 기술을 필요로 할 것으로 예상한다. 더 먼 미래에 마이크론은 수직 HBM(vHBM)을 도입할 계획이다. 이는 메모리를 인터포저 위에 나란히 배치하는 대신 ASIC과 CPU 위에 직접 적층하는 방식이다. 이 아키텍처는 밀집된 수직 연결과 인접 배치로 인한 상당한 대역폭 향상(및 현저히 낮은 지연 시간)을 약속하지만, 전력 공급 및 열 방출과 관련된 상당한 과제도 야기할 것으로 예상된다. 이를 해결하기 위해 마이크론은 하이브리드 본딩을 통한 첨단 인터커넥트, 통합 히트 스프레더, 그리고 열을 고려한 설계(thermally aware designs)를 사용할 계획이다. 흥미롭게도, 회사는 일부 설계에서 기존 HBM과 vHBM이 공존할 것으로 예상하며, 여기서 vHBM은 최대 대역폭을 제공하고 전통적인 HBM은 용량 요구사항을 충족할 것이다. 개발 중인 또 다른 기술은 수직 엣지 추론 메모리(vEIM)로, 이는 HBM과 많은 패키징 및 통합 기술을 공유하지만, 최대 대역폭보다 전력 효율성이 더 중요한 애플리케이션을 대상으로 한다. 마이크론의 제1세대 vEIM은 데이터 전송당 1피코줄 미만으로 적은 에너지를 소비하면서도 HBM4 수준의 formidable한 2TB/s의 대역폭을 제공하도록 설계되었다. 두 아키텍처 모두 특정 애플리케이션을 위해 메모리, 로직, 패키징 및 열 특성을 최적화하기 위해 고객과의 긴밀한 협력이 필요하므로, 마이크론은 vHBM과 vEIM의 성공을 위해 고객과 협력해야 한다. 흥미롭게도 마이크론의 고객 맞춤형 개발 노력은 HBM과 EIM을 넘어선다. 예를 들어, 회사는 데이터 센터 애플리케이션을 위해 LPDDR6을 최적화하기 위해 메타(Meta)와 협력하고 있으며, 여기에는 주로 신뢰성, 서비스성 및 가용성이 포함된다. 마이크론은 LPDDR6이 LPDDR5 대비 약 35%의 전력 소비 감소를 가져올 것으로 예상하며, 이는 고밀도 메모리 배치에서 매우 중요할 것이다. 또한 회사는 주요 고객과 협력하여 DDR6(DDR5 대역폭의 2배를 타겟으로 함)을 개발하여 그들의 요구사항을 더 잘 이해하고 궁극적으로 충족시킬 계획이다. 고객 협력과 관련하여 드보어는 마이크론이 이제 제품 정의의 초기 단계부터 공동 설계, 개발, 검증 및 양산에 이르기까지 고객과 협력하고 있다고 강조한다. 이 임원에 따르면, 이러한 접근 방식은 과거 회사가 고객과 함께 작업하던 방식과 상당히 다르다. 드보어는 “우리의 AI 공동 발명 기회 전반에 걸쳐 우리는 함께 상상하고, 함께 설계하고, 함께 개발하고, 함께 검증한 다음 대규모로 공급하고 있습니다. 이 기회는 정말 독특합니다. 3년 또는 4년 전 우리가 고객과 상호작용하던 방식과는 매우 다릅니다.”라고 말했다. 고급 CMOS: 10배 이상 성능 향상 DRAM 셀을 축소하고 수직 메모리 아키텍처를 개발하는 것 외에도 마이크론은 주변 회로를 위한 고급 CMOS 기술을 개발하고 있다. 회사의 로드맵에는 하이-k 메탈 게이트 트랜지스터를 갖춘 여러 세대의 DRAM CMOS 로직이 포함되며, 이어 1세대 및 2세대 3D CMOS 기술이 뒤따른다. 마이크론은 2020년부터 2030년까지 CMOS 로직 성능을 10배 이상 향상시킬 것으로 예상하며, 이는 AI 중심 메모리 제품의 증가하는 대역폭 및 전력 요구 사항을 해결하는 데 도움이 될 것이다. 3D NAND: 차세대 400L 3D NAND에서 AI 중심 NAND로 마이크론의 행사는 주로 DRAM의 미래에 전념했지만, 회사는 차세대 11세대 400층 3D NAND, G11 이후 3D NAND, 그리고 높은 대역폭 또는 높은 IOPS를 제공하는 AI 중심 NAND 메모리를 포함한 향후 NAND 혁신에 대한 일부 세부 사항도 공유했다. 마이크론의 차세대 G11(N170) 3D NAND 기술은 현재의 G9(N160) 공정과 상당한 차이를 보인다. 회사는 활성 메모리 레이어 수를 276개에서 400개 이상으로 늘리고, 웨이퍼 온 웨이퍼 본딩을 도입하며, 업계 선두의 메모리 셀 피치를 구현할 계획이다. 이러한 개선 사항은 G11 3D NAND의 비트 밀도를 G9 3D NAND 대비 두 배로 증가시킬 것으로 예상된다. 구체적으로 3D TLC 장치의 경우 21 Gb/mm²에서 42 Gb/mm²로 증가할 것으로 보이며, 이는 기술이 성숙한 수율에 도달할 때 비트당 제조 비용을 크게 절감할 것이다. 저장 밀도 증가 외에도 G11은 G9 대비 I/O 속도를 50% 향상시키는 것을 목표로 하며, 이는 약 5,400 MT/s의 잠재적 전송 속도를 의미한다. 또한 마이크론은 비트당 데이터 전송 에너지 소비를 25% 이상 줄일 것으로 예상하는데, 이는 방대한 양의 데이터를 이동하는 고용량 SSD 및 AI 스토리지 시스템에 있어 중요한 개선 사항이다. G11에서 가장 중요한 변화 중 하나는 웨이퍼 온 웨이퍼 본딩을 채택한 것으로, 이를 통해 마이크론은 메모리 어레이와 주변 및 I/O 회로를 다른 웨이퍼에서 제조한 후 함께 본딩할 수 있다. 중국 제조사 YMTC는 이 방법을 사용하여 저장 용량과 성능을 극대화해 왔으므로, 마이크론을 비롯한 다른 메모리 제조사들도 이 기술을 채택하는 것은 놀라운 일이 아니다. 마이크론은 G11 3D NAND의 양산을 2027년 하반기에 시작할 것으로 예상된다. G11 이후 3D NAND 개선: 새로운 소재 및 추가 XYZ 스케일링 마이크론은 새로운 소재, 더 밀도 높은 메모리 셀 아키텍처, 그리고 더 에너지 효율적인 장치와 데이터 경로의 조합을 통해 11세대 이후에도 3D NAND의 성능을 지속적으로 개선할 계획이다. 구체적으로 마이크론은 향후 메모리 장치의 전기적 특성을 향상시킬 수 있는 고투과도성 소재와, 활성 레이어 증가로 달성할 수 있는 것 이상의 저장 밀도를 높이기 위한 초고밀도 셀 아키텍처를 조사하고 있다. 한편, 더 에너지 효율적인 회로와 데이터 경로는 더 높은 NAND 용량과 더 빠른 인터페이스와 관련된 증가하는 전력 소비를 상쇄하는 데 도움이 될 것이다. "11세대 이후, 우리는 강력한 로드맵을 보유하고 있습니다. 오늘 이에 대해 상세히 설명하지는 않겠지만, 새로운 소재를 도입하고 셀 아키텍처의 밀도를 높이는 데 집중하며, 향후 XYZ 스케일링을 계속 추진할 것입니다."라고 DeBoer는 말했다. "[…] 현재 산업계의 방향성과 마이크론의 방향성은 레이어를 추가하는 것과 셀 차원을 축소하는 양쪽 모두에서 스케일링하는 것입니다." 회사는 도입할 소재를 특정하지 않았으며, 이러한 소재가 메모리 셀 구조에 어떤 영향을 미칠지 설명하지도 않았다. 또한 11세대 이후의 NAND 세대에 대한 정량적인 밀도, 성능, 또는 전력 목표치도 제공하지 않았다. AI 지향 NAND: 더 높은 IOPS와 대역폭 마이크론은 G12 또는 G13 3D NAND 세대에 대한 세부 사항을 공유할 준비가 되지 않았지만, AI 애플리케이션을 위해 두 가지 특수화된 NAND 아키텍처를 개발 중이라고 밝혔다. 첫 번째인 '고-IOPS AI NAND' 아키텍처는 최대 랜덤 I/O 성능에 중점을 두며, 벡터 검색, 그래프 분석, AI 컨텍스트 관리와 같은 워크로드를 가속화하기 위해 작은 블록을 사용하는 SLC 기반 설계를 활용한다. 마이크론은 구성에 따라 약 2,500만에서 1억 IOPS를 제공할 수 있는 제품을 구상하고 있으며, 향후 몇 년 내에 이 접근 방식을 기반으로 한 제품을 시장에 출시할 것으로 예상된다. 두 번째인 '고대역폭 AI NAND' 아키텍처는 랜덤 I/O 성능보다 대역폭을 우선시한다. 마이크론은 TSV(Through-Silicon Via)로 연결되고 AI 가속기 근처에 위치한 로직 베이스 다이(logic base die)를 갖춘 수직 적층 NAND 장치를 조사하고 있다. 많은 관점에서 이 개념은 산디스크의 HBF와 유사해 보이지만, 마이크론은 단순히 NAND 스택을 인터포저 위의 AI 가속기 옆에 배치하는 것만으로는 충분한 이점을 제공하지 못한다고 믿는다. 대신 회사는 NAND를 컴퓨팅 리소스에 더 가깝게 가져오지만 AI 가속기의 중요한 shoreline(외곽 또는 가장자리)을 반드시 차지하지는 않는 대체 통합 접근 방식을 모색하고 있다. "[고대역폭 AI NAND는] 더 비용이 많이 들며, 가치 제안에 필요한 기준과 비용 지점을 충족하도록 고객이 이를 구현할 수 있는 파트너십 방식으로 도입해야 합니다."라고 DeBoer는 말했다. "우리는 메모리를 가속기에 더 가깝게 가져오기 위해 TSV 적층 NAND를 로직 베이스 다이와 함께 사용하고 있습니다. GPU의 shoreline에 이를 배치하는 것이 의미가 있다고 생각하지 않습니다. 대신 고성능 NAND의 이점을 활용하기 위해 이를 컴퓨팅 자체에 더 가깝게 배치하고자 합니다." 이러한 특수화된 AI 중심 NAND 아키텍처는 가까운 장래에 최대 512TB 용량의 드라이브를 포함하는 마이크론의 기존 SSD 로드맵을 보완할 것이다. 안톤 실로프는 Tom’s Hardware의 기고 작가입니다. 지난 수십 년간 그는 CPU와 GPU부터 슈퍼컴퓨터에 이르기까지, 그리고 최신 공정 기술과 파브리케이션 도구, 첨단 산업 동향에 이르기까지 다양한 주제를 다뤄왔습니다.
📄 원문 (English)
Micron details ambitious DRAM and NAND roadmap — 3D NAND, High-NA EUV, new materials, and custom silicon makes a comeback Custom memory is about to become mainstream. Last month, Micron disclosed its DRAM and NAND memory roadmaps for the next several years, revealing plans to use wafer bonding, new materials that enable making NAND cells smaller, High-NA EUV lithography, and detailing its moves toward 3D DRAM. Perhaps the most revealing part of Micron's story is that the company plans to expand its portfolio of custom DRAM and NAND products as AI developers increasingly require memory and storage solutions optimized for their unique processor architectures and specific workloads. " DRAM is nearing atomic limits at this point: although we have confidence in several more planar nodes, we are very focused on making sure that we introduce 3D DRAM at the optimal time from a cost and performance point of view," said Scott DeBoer, president and chief technology and products officer at Micron, at the company's event earlier this month. "[With 3D NAND, we are] really focused on new materials densifying the cell architecture, and continuing to focus on that XYZ scaling going forward." DRAM: 4F2 cells axed, High-NA EUV lithography, new materials, and 3D DRAM enable future scaling In a surprising move, Micron decided to abandon plans to produce DRAM with 4F2 memory cells, unlike its rivals at CXMT, Samsung, and SK hynix, citing the lack of a viable scaling path beyond where Micron is today. Instead, Micron's roadmap for the coming years includes wafer bonding, High-NA EUV lithography, new materials, and eventually 3D DRAM. The company plans to begin mass production of its next-generation 1δ memory in the second half of 2027, while subsequent 1ε, ζÅ, and ηÅ technologies are at various stages of development. In parallel, Micron is developing two generations of 3D DRAM that could eventually succeed conventional planar memory. Micron's current 1γ (1-gamma) DRAM process technology, which is in high-volume manufacturing (HVM), is the company's first DRAM node to use EUV lithography. Previously, Micron had used multipatterning with DUV lithography and remained competitive with Samsung and SK hynix, which relied on EUV for critical layers. Micron's next-generation 1δ (1-delta) fabrication process is currently in the yield ramp stage and is scheduled to enter mass production in the second half of 2027. The company expects the technology to increase bit density by mid-20% compared to 1γ, while advanced high-k metal gate (HKMG) CMOS, new materials, angstrom-level process control, and equipment intelligence should improve performance, power efficiency, and ultimately yields as well as costs. Micron plans to manufacture 1δ DRAM in the U.S. and use the technology for next-generation DDR, LPDDR, graphics memory, HBM5, vertical HBM (vHBM), and vertical Edge Inference Memory (vEIM) products. Meanwhile, to make HBM5, vHBM5, and vEIM products, the node will also support additional features like through-silicon vias (TSVs) and other elements to improve thermal performance. The subsequent 1ε (1-epsilon) process will rely on wafer bonding, which will enable Micron to produce different structures on separate wafers and then bond them together. This approach could increase flexibility in memory design and manufacturing, but Micron has yet to disclose its plans to implement wafer bonding, which structures it will bond, or what improvements in density, performance, and power consumption the technology will provide. The process is currently under development, and there is no announced production schedule. Micron's ζÅ (zeta-angstrom) production node is currently in early development and will introduce High-NA EUV lithography to memory manufacturing, which will enable further reductions in critical dimensions. The company has not disclosed how many layers will require High-NA lithography, the expected density improvements, or when the technology will enter mass production. However, it is obvious that the node will not be here until at least 2030, years after Samsung and SK hynix adopt High-NA EUV at their DRAM fabs (planned for 2028). The ηÅ (eta-angstrom) process represents the most distant generation on Micron’s disclosed planar DRAM roadmap and is currently in the pathfinding stage. After Micron inserts High-NA EUV lithography into its DRAM production flow, the company intends to bet on other methods of scaling. Although Micron mentions new materials, it hasn't identified them or explained how they will affect device structures. These could include new photoresists, deposition precursors, dielectric materials, or conductive materials that would enable the company to manufacture smaller transistors and capacitors, and ultimately increase DRAM cell density. In any case, Micron's roadmap is focused on continuing development of DRAM based on 6F² cells, which differs from the plans of CXMT, Samsung, and SK hynix. 3D1 and 3D2: Transition to 3D DRAM is looming In parallel with conventional DRAM development, Micron is working on two generations of 3D DRAM, currently called 3D1 and 3D2. Unlike planar DRAM, which primarily relies on smaller memory cells to increase bit density, 3D DRAM would use the vertical dimension to accommodate more memory cells within a given area. Micron intends to introduce the technology when it becomes competitive with conventional DRAM in terms of manufacturing costs and performance. The company has not disclosed architectures, layer counts, or density targets. In fact, while Micron has outlined its future memory architectures through 2030, its DRAM manufacturing roadmap provides a firm production window only for the 1δ process, which is scheduled to enter high-volume manufacturing in the second half of 2027. The company has not disclosed production dates for subsequent planar DRAM nodes or either generation of 3D DRAM. Custom HBM and vertical memory architectures In addition to conventional DRAM, Micron plans to use its future manufacturing technologies for HBM4E, HBM5, HBM5E, and new vertically integrated memory architectures. Starting with HBM4E, the company will offer both standard and custom HBM products, which will be followed by custom HBM5E, vHBM, and vEIM (vertical Edge Inference Memory). All of these will mark the re-emergence of custom memory in mass-produced products. Custom HBM4E (cHBM4E) will enable Micron's customers to shrink memory I/O width and/or integrate additional logic into the memory's base die to free up valuable die space for compute and optimize performance and power consumption for specific AI accelerators. According to Scott DeBoer, Micron’s president and chief technology and products officer, some of these functions would otherwise reside in the ASIC itself, so moving them closer to memory should improve overall system efficiency. "When we co-design a base die, and the certain logic elements that are desired to be put in that base die are generally an offload from GPU circuitry anyway onto the base die to put it closer to the memory," said DeBoer. "Moving what makes more sense onto the base die will still be a reality in [the] vertical HBM timeframe as well." To support these capabilities, Micron intends to use advanced foundry process technologies for the base dies of both standard and custom HBM products, although it has not disclosed specific nodes. For custom designs, the company will select the most cost-effective process that meets customer requirements. For example, Micron expects HBM4E to require more advanced CMOS technologies to meet its performance and power targets. Further down the road, Micron intends to introduce vertical HBM (vHBM), which will stack memory directly on top of ASICs and CPUs rather than next to them on an interposer. This architecture promises substantially higher bandwidth, thanks to dense vertical connections (as well as significantly lower latencies) thanks to adjacent placement, but it is also set to create considerable challenges related to power delivery and heat dissipation. To address them, Micron plans to use hybrid bonding for advanced interconnects, integrated heat spreaders, and thermally aware designs. Interestingly, the company expects conventional HBM and vHBM to coexist in some designs, where vHBM provides maximum bandwidth, while traditional HBM serves capacity requirements. Another technology under development is vertical Edge Inference Memory (vEIM), which shares many of its packaging and integration technologies with HBM, but targets applications that require power efficiency more than maximum bandwidth. Micron's 1st Generation vEIM aims to deliver formidable HBM4-like 2 TB/s of bandwidth while consuming less than 1 picojoule per bit of data transfer energy. Both architectures will require close cooperation with customers to optimize memory, logic, packaging, and thermal characteristics for particular applications, so Micron will need to work with its clients to make vHBM and vEIM successful. Interestingly, Micron's customer-specific development efforts extend beyond HBM and EIM. For example, the company is collaborating with Meta to optimize LPDDR6 for data center applications, which primarily include reliability, serviceability, and availability. Micron expects LPDDR6 to reduce power consumption by approximately 35% compared to LPDDR5, which will be very important for dense memory deployments. The company also intends to develop DDR6 — which targets 2X DDR5 bandwidth — in cooperation with major customers to better understand and ultimately meet their needs. Speaking of customer cooperation, DeBoer stresses that Micron now collaborates with customers from the earliest stages of product definition through joint design, development, validation, and volume production. According to the executive, this approach differs substantially from how the company worked with customers previously. "Across our AI co-invention opportunities we are co-imagining, co-designing, co-developing, co-validating, and then delivering at scale," DeBoer said. "This opportunity is truly unique. It is very different than the way we interacted with customers even three or four years ago." Advanced CMOS: More than 10X performance improvement In addition to shrinking DRAM cells and developing vertical memory architectures, Micron is developing advanced CMOS technologies for peripheral circuitry. The company's roadmap includes several generations of DRAM CMOS logic with high-k metal gate transistors, followed by 1st and 2nd Generation 3D CMOS technologies. Micron expects these advances to increase its CMOS logic performance by more than 10X between 2020 and 2030, which should help the company address the growing bandwidth and power requirements of AI-oriented memory products. 3D NAND: From next-gen 400L 3D NAND to AI-oriented NAND Although Micron's event was mostly dedicated to the future of DRAM, the company also shared some details about its upcoming NAND innovations, which include 11th Generation 3D NAND with 400 layers, post-G11 3D NAND, and AI-oriented NAND memory that either offers high bandwidth or high IOPS. Micron's next-generation G11 (N170) 3D NAND technology represents a substantial departure from its current G9 (N160) process. The company plans to increase the number of active memory layers from 276 to more than 400, introduce wafer-on-wafer bonding, and implement an industry-leading memory cell pitch. These improvements are expected to double the bit density of G11 3D NAND compared with G9 3D NAND, presumably from 21 Gb/mm2 to 42 Gb/mm2 in the case of 3D TLC devices, which should substantially reduce manufacturing costs per bit once the technology reaches mature yields. In addition to increased storage density, G11 also targets a 50% increase in I/O speed compared with G9, which implies a potential transfer rate of approximately 5,400 MT/s. Furthermore, Micron expects to reduce data transfer energy consumption by more than 25% per bit, an important improvement for high-capacity SSDs and AI storage systems that tend to move huge amounts of data. One of the most important changes with G11 is the adoption of wafer-on-wafer bonding, which lets Micron manufacture memory arrays and the periphery and I/O circuits on another wafer, then bond them together. Chinese manufacturer YMTC has used this method to maximize storage capacity and performance, so it is not surprising that Micron and other memory manufacturers are adopting the technique as well. Micron expects to start mass production of G11 3D NAND in the second half of 2027. Improving 3D NAND past G11: New materials and further XYZ scaling Micron intends to continue improving 3D NAND beyond 11th Generation through a combination of new materials, denser memory cell architectures, and more energy-efficient devices and data paths. Specifically, Micron is investigating high-mobility materials that could improve the electrical characteristics of future memory devices, as well as ultra-dense cell architectures intended to increase storage density beyond what an increase in active layers provides. Meanwhile, more energy-efficient circuitry and data paths should help offset the growing power consumption associated with higher NAND capacities and faster interfaces. "Beyond G11, we have a strong roadmap, not going to go into great detail on it today, but really focused on new materials densifying the cell architecture, and continuing to focus on that XYZ scaling going forward," said DeBoer. "[…] The current industry direction and Micron’s direction is scaling both by adding layers [and] also by shrinking the cell dimensions." The company has not identified the materials it intends to introduce or explained how they will affect memory cell structures. Nor has it provided quantitative density, performance, or power targets for NAND generations beyond G11. AI-oriented NAND: Higher IOPS and bandwidth Although Micron is not ready to share details about its G12 or G13 3D NAND generations, the company disclosed that it is developing two specialized NAND architectures for AI applications. The first — High-IOPS AI NAND — architecture focuses on maximum random I/O performance and uses SLC-based designs with small blocks to accelerate workloads such as vector searches, graph analytics, and AI context management. Micron envisions products capable of delivering approximately 25 million to 100 million IOPS, depending on their configuration, and expects to bring products based on this approach to market over the next couple of years. The second — High-Bandwidth AI NAND — architecture prioritizes bandwidth over random I/O performance. Micron is investigating vertically stacked NAND devices connected through TSVs and equipped with a logic base die that resides close to AI accelerators, so from many points of view this concept resembles SanDisk's HBF. However, Micron does not believe that simply placing NAND stacks alongside AI accelerators on an interposer offers sufficient advantages. Instead, the company is exploring alternative integration approaches that bring NAND closer to compute resources, but don't necessarily consume valuable shoreline (the perimeter, or edge) of AI accelerators. "[The High-Bandwidth AI NAND is] more costly and has to be implemented in partnership with customers in a way to ensure that they are meeting the mark and the cost point to drive the value proposition," DeBoer said. "We are enabling TSV-stacked NAND with a logic base die to bring memory closer to accelerators. We do not think placing it along the shoreline of the GPU has merit. Instead, we want to position it closer to the compute itself to take advantage of this high-performance NAND." These specialized AI-focused NAND architectures will complement Micron's conventional SSD roadmap, which includes plans for drives with capacities of up to 512 TB in the foreseeable future. Anton Shilov is a contributing writer at Tom’s Hardware. Over the past couple of decades, he has covered everything from CPUs and GPUs to supercomputers and from modern process technologies and latest fab tools to high-tech industry trends.
▶ 칩 라이브 24 홈으로 — chiplive24.com

다른 반도체 뉴스

3 AI Chip Stocks Retail Investors Are Watching After The Nvidia Selloff · Yahoo FinanceSK hynix Sinks 21% in a Week With Micron and Sandisk. Its U.S. Premium Is an “Extra Special Case” · Yahoo FinanceThis week on Tom's Hardware Premium: 21 November 2026 — AMD, Nvidia and more show off the future of high-performance computing at SC26 · Tom's HardwareThis week on Tom's Hardware Premium: 21 November 2026 — AMD, Nvidia and more show off the future of high-performance computing at SC26 · Tom's HardwareAfter Plummeting 62% This Year, Could Buying Intel Stock Today Set You Up for Life? · Yahoo FinancePrediction: Nvidia Stock Will Be Worth This Much in 1 Year · Yahoo FinanceApplied Materials vs. Nvidia: Which Tech Stock Is a Better Buy for 2027? · Yahoo FinanceTrump Calls Huang’s Exit “Such a Tragedy” as His Filing Shows Up to $380,000 of Nvidia Buys · Yahoo Finance