ASRock, 이전 펌웨어 업데이트 후 부팅 실패 보고 후 Radeon RX 7900 XT/XTX용 VBIOS 1.0.6 업데이트
🇰🇷 한글 번역
새로운 펌웨어는 많은 Radeon RX 7900 XT 및 XTX 사용자가 부팅이 불가능한 그래픽 카드를 갖게 된 것으로 보고된 문제 있는 업데이트를 해결합니다.
ASRock은 이전 펌웨어가 여러 GPU를 브릭(고장) 상태로 만들자 Radeon RX 7900 XT 및 XTX 그래픽 카드용 VBIOS 업데이트 1.0.6을 다시 출시했습니다.
ASRock Radeon RX 7900 XT 및 XTX GPU의 문제점을 강조하는 많은 보고가 있었습니다. 해당 보고서에 따르면, 이 그래픽 카드들은 펌웨어 업데이트를 설치한 후 작동을 멈췄습니다. 여러 사례에서는 플래싱 과정 중 GPU가 장착된 상태에서 시스템 재시작 시 POST(사후 전원 검사)가 실패하는 것으로 나타났습니다. 그러나 GPU를 제거하면 동일한 시스템이 정상적으로 부팅되었습니다.
이러한 보고는 주로 ASRock RX 7900 XT/XTX 모델에 영향을 미쳤으며, 이에 대응하기 위해 ASRock은 RX 7900 XTX GPU용 새로운 VBIOS 패키지인 ASRVBFlash 1.0.6이라는 새로운 VBIOS 펌웨어를 조용히 출시했습니다. 이 펌웨어는 11월 6일자로 작성되었지만, 오늘만 ASRock 지원 페이지에 나타났습니다. 이 새로운 펌웨어는 GPU를 브릭 상태로 만들었던 것으로 추정되는 이전 1.0.5 펌웨어가 회수된 직후에 출시되었습니다.
원래 업데이트는 10월 29일 Radeon RX 7000 시리즈 그래픽 카드 전반에 걸친 보안 관련 VBIOS 배포의 일환으로 출시되었으며, ASRock은 RX 7900 XT Phantom Gaming을 포함하여 Phantom Gaming 및 Taichi 시리즈의 여러 변형 모델을 포함한 10개 모델용 펌웨어를 출시했습니다.
이제 ASRock이 이전 펌웨어를 버전 1.0.6으로 교체했지만, ASRock은 이전 실패의 원인을 설명하거나 다루지 않았습니다. 또한 새로운 펌웨어가 브릭된 GPU와 관련된 문제들을 구체적으로 타겟팅한다는 명확한 확인도 없습니다. 따라서 ASRock이 이러한 문제가 해결되었음을 설명하고 확인할 때까지 불필요한 VBIOS 플래싱을 피하는 것이 가장 좋습니다.
뉴스 출처: ASRock, Videocardz
더 많은 뉴스 커버리지를 피드에서 받아보시려면 Google에서 Wccftech를 팔로우하세요.
📄 원문 (English)
The new firmware addresses the problematic update that reportedly left many Radeon RX 7900 XT and XTX users with GPUs that couldn't boot.
ASRock Released Another VBIOS Update 1.0.6 for Radeon RX 7900 XT and XTX Graphics Cards After Previous Firmware Bricked Several GPUs
There were a lot of reports that highlighted the problem with the ASRock Radeon RX 7900 XT and XTX GPUs. As per those reports, these graphics cards stopped working after installing a firmware update. Several cases highlighted that the system restart failed to POST with the GPUs during the flashing process. However, removing the GPUs allowed the same systems boot normally.
These reports mostly affected ASRock RX 7900 XT/XTX models, and to address this, ASRock has quietly released a new VBIOS firmware, ASRVBFlash 1.0.6, which is a new VBIOS package for the RX 7900 XTX GPUs. The firmware is dated November 6, although it appeared on the ASRock support page only today. The new firmware was released shortly after the previous 1.0.5 firmware was pulled back, which was supposedly bricking GPUs.
The original update was released on October 29 as a part of a wider security-related VBIOS rollout for the Radeon RX 7000 series graphics cards, and ASRock released the firmware for 10 models, including the RX 7900 XT Phantom Gaming and more variants in the Phantom Gaming and Taichi series.
Now that ASRock has replaced the previous firmware with version 1.0.6, ASRock hasn't addressed or explained what caused the earlier failures. There is also no clear confirmation that the new firmware specifically targets the problems associated with the bricked GPUs. So, it's best to avoid unnecessary VBIOS flashing until ASRock explains and confirms that those issues have been fixed.
News Sources: ASRock, Videocardz
Follow Wccftech on Google to get more of our news coverage in your feeds.
▶ 칩 라이브 24 홈으로 — chiplive24.com