엔비디아,次世代 NVLink 스위치 보드의 AI 서버 신호 손실 해결을 위해 테플론 검토 중
🇰🇷 한글 번역
- 0-20%: 비현실적 - 신뢰할 수 있는 출처가 부족함
- 21-40%: 의문스러움 - 여전히 우려 사항이 존재함
- 41-60%: 타당함 - 합리적인 증거가 있음
- 61-80%: 확률적 - 강력한 증거가 있음
- 81-100%: 매우 확률적 - 여러 신뢰할 수 있는 출처가 있음
45%
타당함
현재 AI 칩은 레인당 200Gbps의 전송 속도를 밀어붙이고 있어 전송 병목 현상이 발생하고 있으며, 따라서 가장 미세한 간섭이라도 성능에 영향을 미칠 수 있습니다. 아마도 최적의 서버 처리량을 유지하기 위한 더 나은 방법이 필요하다는 것을 인지한 엔비디아는 AI 하드웨어의 가장 큰 골치거리 중 하나를 해결하기 위해 놀라운 소재를 모색하고 있는 것으로 보고되었습니다. 바로 PTFE(폴리테트라플루오로에틸렌)로, 테프론이라는 브랜드 이름으로 더 잘 알려져 있으며 논스틱 팬의 코팅재로도 사용됩니다.
PTFE는 에너지 손실이 훨씬 적어 엔비디아의 목표 달성에 적합하지만, 소재의 복잡성으로 인해 적용이 어렵습니다.
테프론은 10월 초 OCP 정상회의에서 엔비디아가 최신 NVLink 스위치 보드를 선보인 후 올해 TPCA 쇼에서 공개되었으며, 엔비디아가 PTFE를 고려하고 있는 것으로 알려졌습니다. 논스틱 조리기구 재료를 AI 칩에 재사용하려는 이유는 신호 손실 감소 때문입니다. 앞서 언급했듯이 AI 칩은 전송 한계에 도달하고 있으며, 코패키지 옵틱스가 아직 준비되지 않았기 때문에 현재로서는 회로 기판을 개선하는 것이 가장 직접적인 해결책입니다.
PTFE는 오늘날 기판에 사용되는 수지에 비해 신호 에너지 손실이 훨씬 적기 때문에, 업계 관계자들이 엔비디아가 루빈 울트라(Rubin Ultra) 스위치 보드나 차세대 직교형 미드플레인에 이를 사용할 계획이라고 말하는 것은 놀라운 일이 아닙니다. 이를 통해 고속 스위칭이 복잡한 구리 케이블이 아닌 PCB(인쇄회로기판) 상에서 이루어질 수 있습니다. 한 분석가는 또한 기판이 70층 이상에 달하는 상황에서 최고 등급의 M9 소재조차도 부족하므로 테프론이 논리적인 선택이라고 주장했습니다.
이 소재의 역사로 돌아가보면, 그 특성으로 인해 군사 레이더, 위성, 자동차 ADAS(고급 운전자 지원 시스템) 레이더 등에서 매우 유용하지만 안테나 유형 응용 분야로 제한됩니다. 그 이유를 장단점을 논의하면서 알게 될 것입니다. 먼저 PTFE의 논스틱 특성은 다른 소재와의 접착력이 낮다는 것을 의미하므로, 수십 개의 레이어로 구성된 기판을 단순히 만들 수 없습니다. 또한 얇고 부드러워 열에 잘 결합하고, 깨끗하게 드릴링하며, 도금이 용이한 에폭시 또는 탄화수소 수지보다 가공하기 더 어렵고 비용이 많이 듭니다.
보고서는 또한 업계 추산에 따르면 전체 수율이 5% 미만이며 PTFE는 여전히 샘플 단계에 머물러 있다고 언급합니다. 테프론의 양면성은 자연스럽게 공급업체들을 불안하게 만들었으며, 이는 일부 공급업체들의 회의론을 불러일으켰습니다. 한 업계 회장은 30년 동안 누구도 회로 기판에 PTFE를 사용하지 않은 이유를 의문시하며, 엔비디아가 하이엔드 라미네이트 부족 때문에만 이를 문의했다고 믿고 있다고 보고되었습니다. 요약하자면, PTFE가 주류가 되지 않을 가능성이 있습니다.
회의론에도 불구하고, 중국, 대만, 미국의 벤더를 포함한 엔비디아의 공개된 파트너들 중 많은 이들이 PTFE를 처리할 수 있는 장비를 확보한 것으로 보고되었습니다. 한 분석가는 2년 이내에 가공 병목 현상이 해결될 것으로 예측하지만, 명확한 결과는 2028년부터 2030년경에나 예상된다고 밝혔습니다.
뉴스 출처: 상무타임스
구글에서 Wccftech를 팔로우하여 피드에서 더 많은 뉴스 커버리지를 받으세요.
📄 원문 (English)
- 0-20%: Unlikely - Lacks credible sources
- 21-40%: Questionable - Some concerns remain
- 41-60%: Plausible - Reasonable evidence
- 61-80%: Probable - Strong evidence
- 81-100%: Highly Likely - Multiple reliable sources
45%
Plausible
Current AI chips face a transmission bottleneck where they’re pushing 200Gbps per lane, so even the slightest interference can affect performance. Possibly realizing that there needs to be a better way to maintain optimal server throughput, NVIDIA is reportedly looking at an unlikely material to tackle one of AI hardware’s biggest headaches; PTFE, better known by the brand name Teflon and as the coating on non-stick pans.
PTFE wastes far less energy, making it suitable for achieving NVIDIA’s goals, but material complexity makes it difficult to employ
Teflon was showcased at this year’s TPCA Show after NVIDIA displayed its latest NVLink switch board at the OCP summit in early October and was said to be considering the PTFE. The reason for repurposing non-stick cookware material to be used in AI chips boils down to signal loss reduction. As stated above, AI chips are reaching their transmission limits, and because co-packaged optics isn’t ready yet, improving the circuit board is currently the most direct solution available.
PTFE wastes far less signal energy than the resins used in boards today, so it’s no surprise that industry sources say NVIDIA plans to use it in a Rubin Ultra switch board or a next-generation orthogonal mid-plane, letting high-speed switching happen on the PCB instead of through complex copper cables. An analyst has also argued that, with boards reaching 70-plus layers, even top-grade M9 material falls short, leaving Teflon as the logical choice.
As for the history of this material, its properties make it incredibly useful in military radars, satellites, and automotive ADAS radar, but it’s limited to antenna-type applications, and you’ll find out why as we discuss the trade-offs. For starters, PTFE’s non-stick nature means it bonds poorly with other materials, so it can’t simply make a board with dozens of layers. It’s also thin and soft, making it harder and costlier to process than epoxy or hydrocarbon resins that bond well under heat, drill cleanly, and plate easily.
The report also mentions that industry estimates put overall yields below 5 percent, and PTFE remains at the sample stage. The duality of Teflon would naturally make suppliers nervous, which has made some suppliers skeptical. An industry chairman reportedly questioned why nobody had used PTFE in circuit boards for 30 years and believes NVIDIA only asked about it because of high-end laminate shortages. In short, PTFE may not become mainstream.
Despite the skepticism, many of NVIDIA’s listed partners, including Chinese, Taiwanese, and U.S. vendors, have reportedly secured much of the equipment capable of handling PTFE. An analyst has predicted that the processing bottleneck could be solved within two years, though a clear outcome isn’t expected until around 2028 to 2030.
News Source: Commercial Times
Follow Wccftech on Google to get more of our news coverage in your feeds.
▶ 칩 라이브 24 홈으로 — chiplive24.com