인텔의 포스트 레이저레이크 타이탄레이크 플랫폼, 리눅스 블루투스 패치에서 PCI ID 0x9329 'Scorpius Peak2 C0, 타이탄레이크'로 확인
🇰🇷 한글 번역
인텔은 차기 타이탄 레이크(Titan Lake) 가문의 초기 진전을 보이고 있으며, 이 플랫폼은 라저 레이크(Razor Lake) 출시를 이어갈 것으로 예상된다.
인텔, 타이탄 레이크 및 스코피어스 피크2 C0 연결성 하드웨어를 위한 새로운 블루투스 PCI ID와 CNVi 식별자에 대한 리눅스 지원 추가
인텔은 최근 두 개의 블루투스 드라이버 패치를 통해 차기 타이탄 레이크 가문에 대한 리눅스 지원을 조용히 진행 중이다. 이 패치들은 새로운 하드웨어 식별자를 추가하며, 특히 타이탄 레이크 플랫폼과 직접적으로 연관되어 있어 인텔의 라저 레이크 이후 출시될 것으로 예상되는 이 플랫폼의 개발 초기 모습을 엿보게 해준다.
첫 번째 패치는 9월 인텔의 캐서린 L.에 의해 제출되었으며, CNVi ID 0xA11B를 추가해 이를 타이탄 레이크용 스코피어스 피크2 C0으로 식별했다. 이 변경사항은 블루투스 PCI 드라이버가 기존 스코피어스 피크2 변형과 함께 이 새로운 스테핑을 인식할 수 있게 한다. CNVi는 인텔의 연결성 아키텍처로, 무선 기능을 플랫폼에 통합하는 데 사용된다.
여기서 이 패치는 특히 흥미로운데, 인텔이 새로운 스코피어스 피크2 C0 식별자를 타이탄 레이크와 명시적으로 연관시켰기 때문이다. 이는 하드웨어와 미래의 CPU 플랫폼 간에 직접적인 소프트웨어 수준의 연결을 제공한다. 또한 10월에 제출된 두 번째 패치는 인텔이 'btintel_pcie' 드라이버에 PCI 장치 ID 0x9329를 추가하고 이를 '스코피어스 피크2 C0, 타이탄 레이크'로 명명했음을 보여준다. 이 패치에는 'btintel_pcie' 드라이버를 통해 인텔 블루투스 장치로 감지되는 장치의 'lspci' 출력도 포함되어 있다.
비록 이러한 변경사항은 작지만, 인텔 타이탄 레이크에 대한言及은 이 패치들을 중요하게 만든다. 이는 인텔의 리눅스 개발 프로세스가 이미 플랫폼과 관련된 하드웨어가 업스트림 드라이버에 의해 식별되고 지원되는 단계에 도달했음을 나타낸다.
그럼에도 불구하고 타이탄 레이크의 사양과 관련해 실질적인 내용은 없다. 패치에는 아키텍처, 코어 및 클록 세부 사항, 또는 공정 노드에 대한 정보가 포함되어 있지 않다. 타이탄 레이크는 이전에 몇몇 보고서와 인텔의 라저 레이크를 이어가는 누설된 인텔 로드맵에 등장한 바 있다. 타이탄 레이크는 '유니파이드 코어(Unified Core)' 아키텍처를 갖춘 플랫폼이 될 것으로 예상되며, 특히 모바일 세그먼트를 목표로 할 것이다.
뉴스 출처: @InstLatX64, 커널, 커널
더 많은 뉴스 커버리지를 피드에서 받아보려면 Wccftech를 구글에서 팔로우하세요.
📄 원문 (English)
Intel is also making some early progress for its upcoming Titan Lake family, which supposedly follows Razor Lake launch.
Intel Adds Linux Support for New Bluetooth PCI ID and CNVi Identifier for Titan Lake and Scorpius Peak2 C0 Connectivity hardware
Intel is quietly making some progress in supporting its upcoming Titan Lake family on Linux, with two recent Bluetooth driver patches adding new hardware identifiers. These are specifically linked to the Titan Lake platform and give us an early look into the platform's development, which is expected to be released after Intel's Razor Lake.
The first patch was submitted by Intel's Catherine L. in September, which adds CNVi ID 0xA11B, identifying it as Scorpius Peak2 C0 for Titan Lake. The change lets the Bluetooth PCI driver recognize this new stepping alongside existing Scorpius Peak2 variants. CNVi is Intel's connectivity architecture, which is used to integrate wireless functionality with its platforms.
Here, the patch is particularly interesting because Intel explicitly associated the new Scorpius Peak2 C0 identifier with Titan Lake. This provides a direct software-level connection between the hardware and the future CPU platform. Moreover, a second patch submitted in October shows that Intel has added PCI device ID 0x9329 to the "btintel_pcie" driver and labelled it "Scorpius Peak2 C0, Titan Lake". The patch also includes "lspci" output showing the device being detected as an Intel Bluetooth device with the "btintel_pcie driver".
Even though these are some small changes, the mention of Intel Titan Lake makes the patches significant. These indicate that Intel's Linux development process has already reached a point where hardware associated with the platform is being identified and supported by the upstream drivers.
That said, there is nothing substantial when it comes to Titan Lake's specifications. The patches do not include any information about the architecture, core and clock details, or process node. Titan Lake has previously appeared in a few reports and in leaked Intel roadmaps, which follow Intel's Razor Lake. Titan Lake is expected to be the one with a "Unified Core" architecture and will be specifically aimed at the mobile segment.
News Sources: @InstLatX64, Kernel, Kernel
Follow Wccftech on Google to get more of our news coverage in your feeds.
▶ 칩 라이브 24 홈으로 — chiplive24.com